How to set a Swarovski Rivoli | Beads Jar Jewellery Guide

22/01/2018 0 Comment(s) Introduction to Beading for beginners, Tutorials and Mini-Makes,
Set a sparkling Swarovski Rivoli into one of our beautiful settings in seconds using tweezers and Fevi Kwik jewellery glue. This technique is so quick and produces stunning results. These settings can be added to chains to create pendants and Bracelets, or choose the stud setting to make a pair of earrings. We've used a 12mm Emerald Rivoli for this guide but you may use whichever size and Colour is preferable to you. See our full range of Swarovski Rivoli Crystals here

Things you will need for this guide:

  • 12mm Emerald Swarovski Rivoli (E100/1)
  • 12mm Swarovski Rivoli setting (H106/18)
  • Fevi Kwik jewellery glue (E16)
  • Stone setting tweezers (J39/4)

Step 1


Carefully open the Fevi Kwik jewellery glue being careful not to get any on your skin. Line the Rivoli setting with a very small amount of glue making sure it's spread out evenly. 

Step 2

Pick up the Rivoli with the stone setting tweezers and carefully position it in the centre of the setting making sure you don't get any glue on the top of the Rivoli. Once it's in place and you're sure no glue has escaped the edges, gently push down with your finger to finish.

 

...

You can now connect this to a chain with both sides of the setting and use it as a connector, or add a Jump Ring to one loop and a wire wrapped charm dangle to the other to create a pendant drop. Take a look at our beautiful Emerald Isle Bracelet and Violet Bouquet Earrings to see finished designs using Rivoli crystals. Free step by step instructions included! 

Leave a Comment

Submit
The product is currently Out-of-Stock. Enter your email address below and we will notify you as soon as the product is available.
Name
Email
Comments